JLW Keyboards
Le Chiffre+ Accoutrements
Le Chiffre+ Accoutrements
Regular price
$50.00 USD
Regular price
Sale price
$50.00 USD
Unit price
/
per
Low stock: 2 left
Parts and Add-Ons for the LeChiffre+
- (1) black PCB by Sporkus
- Black hotswap sockets for MX. Solder only support for Alps.
STM32 MX/Alps PCB (36 key PCB, error batch):
- This is a 36 key layout PCB that matches the 3 thumb layout for Le Capybara (the thumb keys are 1-1-1.25 on the left hand and 1.25-1-1 on the right hand).
- However, this batch was produced using the wrong gerber version with an error in the switch matrix, and thus cannot be used as a 36 key variant with an encoder (specifically, the middle thumb on the right hand shares a matrix position with the encoder. You are able to use this with more than the OG 34 key layout, as long as you do not put a switch/encoder in the middle spot AND a switch in the right middle thumb position at the same time.)
- The hotswap sockets have been placed in the OG 34 key layout (as this will work with the center encoder or switch.)
- This 100% works as a standard 34 key PCB.
- This PCB is white.
STM32 MX/Alps PCB (36 key PCB, error batch):
- A working 36 key layout PCB that matches the 3 thumb layout for Le Capybara (the thumb keys are 1-1-1.25 on the left hand and 1.25-1-1 on the right hand).
- White hotswap sockets placed in the 36 key layout for MX. Alps is solder only.
- (1) EC Chiffre PCB by Sporkus
- (1) laser cut 1.2mm stainless steel plate (tapped for M2 screws)
- hardware included: M2x8mm screws, T6 screwdriver
CNC thick plate:
- (1) white CNC polypropylene thick plate for MX
3DP thick plate
- (1) black 3D-print SLS nylon thick plate
Case foam:
- (1) 2mm bottom case foam
Encoder:
- Standard EC11 encoder, D shaft, with detents and push switch function